Interlocking cold formed sheet pile MSZ15-312 or MSZ15-340 is not large enough to be marked MSZ15-350 watertight sealant with the word "hole" or "cover" to provide warning of the hazard it shall be marked with a high visibility paint to identify it.If MSZ15-406 becomes necessary to remove the cover, a monitor shall remain at the opening until the cover is replaced. The monitor shall advise persons entering the area of the hazard and prevent exposure to MSZ15-375 the hazard, but perform no other duties.
Intermediate Lightweight Sheeting Cross Section.Wire rope used for scaffold suspensions shall be capable of supporting six times the MSZ15-350 intended load. Shore or lean-to scaffolds are prohibited. All seams in the membrane shall be welded to prevent leakage. Bin fill shall be placed in 8-inch thick maximum loose lifts and shall be MSZ15-340 compacted to 95% standard Proctor density.Narrow gauge scaffolds (30 inches wide) shall not have working platform erected above 4 feet unless equipped with outriggers. Compaction by saturation is not permitted.
Mega Zee 15 steel sheet piling shall be placed MSZ15-375 and MSZ15-406 thick maximum loose lifts and shall be compacted to a minimum 90% standard Proctor density.Scaffolds shall be braced, and the braces shall be of the proper length so that the scaffold will remain plumb and rigid. All of the listed intermediate MSZ15-312 lightweight sheet pilings are fully manufactured in the USA. All the intermediate lightweight sheet piling can be cut to the length you need it.
| Section | Dimensions | Mass | Moment of inertia |
Modulus of section |
|||
| Width | Height | Thickness | Pile | Wall | |||
| w | h | t/s | |||||
| In | In | In | Lbs/ft | Lbs/ft2 | In4/ft | In3/ft | |
| MSZ10-312 | 38.82 | 2.19 | 0.312 | 49.72 | 15.37 | 1.3 | 0.67 |
| MSZ10-340 | 38.82 | 2.19 | 0.340 | 54.10 | 16.72 | 1.41 | 0.72 |
| MSZ10-350 | 38.82 | 2.19 | 0.350 | 55.69 | 17.22 | 1.45 | 0.74 |
| MSZ10-375 | 38.82 | 2.19 | 0.373 | 59.67 | 18.45 | 1.56 | 0.79 |
| MSZ10-406 | 38.82 | 2.19 | 0.406 | 64.60 | 19.97 | 1.73 | 0.86 |
| MSZ11-312 | 38.55 | 3.53 | 0.312 | 49.72 | 15.48 | 6.83 | 3.76 |
| MSZ11-340 | 38.55 | 3.53 | 0.340 | 54.1 | 16.84 | 7.43 | 4.06 |
| MSZ11-350 | 38.55 | 3.53 | 0.350 | 55.69 | 17.34 | 7.65 | 4.17 |
| MSZ11-375 | 38.55 | 3.53 | 0.375 | 59.67 | 18.58 | 8.21 | 4.44 |
| MSZ11-406 | 38.55 | 3.53 | 0.406 | 64.6 | 20.11 | 8.92 | 4.79 |
| MSZ12-312 | 37.72 | 6.64 | 0.312 | 49.72 | 8.76 | 29.29 | 8.76 |
| MSZ12-340 | 37.72 | 6.64 | 0.340 | 54.1 | 9.50 | 31.87 | 9.50 |
| MSZ12-350 | 37.72 | 6.64 | 0.350 | 55.69 | 9.77 | 32.84 | 9.77 |
| MSZ12-375 | 37.72 | 6.64 | 0.375 | 59.67 | 10.43 | 35.17 | 10.43 |
| MSZ12-406 | 37.72 | 6.64 | 0.406 | 64.6 | 11.27 | 38.16 | 11.27 |
| MSZ13-312 | 36.38 | 9.58 | 0.312 | 49.72 | 14.13 | 67.86 | 14.13 |
| MSZ13-340 | 36.38 | 9.58 | 0.340 | 54.10 | 15.32 | 73.79 | 15.32 |
| MSZ13-350 | 36.38 | 9.58 | 0.350 | 55.69 | 15.74 | 75.93 | 15.74 |
| MSZ13-375 | 36.38 | 9.58 | 0.375 | 50.67 | 16.81 | 81.34 | 16.81 |
| MSZ13-406 | 36.38 | 9.58 | 0.406 | 64.6 | 18.18 | 88.27 | 18.18 |
| MSZ14-312 | 34.56 | 12.24 | 0.312 | 12.27 | 19.62 | 120.97 | 19.62 |
| MSZ14-340 | 34.56 | 12.24 | 0.340 | 18.89 | 21.29 | 131.28 | 21.29 |
| MSZ14-350 | 34.56 | 12.24 | 0.350 | 19.34 | 21.91 | 135.50 | 21.91 |
| MSZ14-375 | 34.56 | 12.24 | 0.375 | 20.72 | 23.38 | 144.93 | 23.38 |
| MSZ14-406 | 34.56 | 12.24 | 0.406 | 22.43 | 25.29 | 157.25 | 25.29 |
| MSZ15-312 | 32.79 | 14.11 | 0.312 | 49.72 | 18.20 | 172.66 | 24.24 |
| MSZ15-340 | 32.79 | 14.11 | 0.340 | 54.10 | 19.80 | 187.52 | 26.27 |
| MSZ15-350 | 32.79 | 14.11 | 0.350 | 55.69 | 20.38 | 193.26 | 27.06 |
| MSZ15-375 | 32.79 | 14.11 | 0.375 | 59.67 | 21.84 | 207.03 | 28.91 |
| MSZ15-406 | 32.79 | 14.11 | 0.406 | 64.60 | 23.64 | 224.46 | 31.27 |
| MSZ16-312 | 31.05 | 15.54 | 0.312 | 49.72 | 19.22 | 223.36 | 28.45 |
| MSZ16-340 | 31.05 | 15.54 | 0.340 | 54.10 | 20.91 | 242.98 | 30.88 |
| MSZ16-350 | 31.05 | 15.54 | 0.350 | 55.69 | 21.53 | 249.85 | 31.74 |
| MSZ16-375 | 31.05 | 15.54 | 0.375 | 59.67 | 23.06 | 267.87 | 33.95 |
| MSZ16-406 | 31.05 | 15.54 | 0.406 | 64.60 | 24.97 | 290.74 | 36.75 |
| MSZ17-312 | 29.71 | 16.43 | 0.312 | 49.72 | 20.09 | 262.34 | 31.60 |
| MSZ17-340 | 29.71 | 16.43 | 0.340 | 54.1 | 21.86 | 285.10 | 34.27 |
| MSZ17-350 | 29.71 | 16.43 | 0.350 | 55.69 | 22.50 | 293.36 | 35.25 |
| MSZ17-575 | 29.71 | 16.43 | 0.375 | 59.67 | 24.11 | 314.57 | 37.71 |
| MSZ17-406 | 29.71 | 16.43 | 0.406 | 64.60 | 26.10 | 241.03 | 40.80 |
| MSZ18-312 | 28.38 | 17.2 | 0.312 | 49.73 | 20.58 | 296.05 | 34.49 |
| MSZ18-340 | 28.38 | 17.2 | 0.24 | 54.1 | 22.39 | 322.09 | 37.45 |
| MSZ18-350 | 28.38 | 17.2 | 0.350 | 55.69 | 23.04 | 330.95 | 38.46 |
| MSZ18-375 | 28.38 | 17.2 | 0.375 | 59.67 | 24.69 | 354.49 | 41.12 |
| MSZ18-406 | 28.38 | 17.2 | 0.406 | 64.6 | 26.74 | 384.83 | 44.53 |
| MSZ19-340 | 26.88 | 17.9 | 0.340 | 54.1 | 23.61 | 368.18 | 41.17 |
| MSZ19-350 | 26.88 | 17.9 | 0.350 | 55.69 | 24.30 | 867.04 | 42.24 |
| MSZ19-375 | 26.88 | 17.9 | 0.375 | 59.67 | 26.04 | 929.74 | 45.25 |
| MSZ19-406 | 26.88 | 17.9 | 0.406 | 64.60 | 28.19 | 1008.15 | 48.97 |
+86-18018031808 
+86-18018031808