Z profile cold formed sheet pile MSZ18-312 and MSZ18-340 shall be designed so only MSZ18-350 horizontal and vertical forces are transmitted to the face elements of the wall. Design A critical factor in bin design is the adequacy of the MSZ18-406 foundation.They shall be free of knots and shall project 6 inches beyond the platform on both sides and ends of the platform and extend 6 inches beyond the bearers.
Mega Zee 18 steel sheet piling MSZ18-375 shall be continuous the full MSZ18-406 length of the wall with no expansion joints. Even though the concrete panels cost slightly more than steel stringers used in standard Bin-Wall, installation savings are MSZ18-350 possible. The horizontal forces from the support slab applied to the top of the face elements of the wall shall be in accordance with Article 5.9.3.6.1. An edging of wood not less than MSZ18-375 or equivalent shall be placed around all sides of the platform to prevent tools from rolling off.As a minimum, the top level of soil reinforcement shall be designed for a tensile load at the wall face equal to 1.9 kips per foot of wall.
The observed reaction of ice against a Contech Marine BinWall indicates that the mass of the structure is able to resist resultant MSZ18-340 forces. This load is to be considered a factored load for which the, FSpo , shall be equal to or greater than 1.0 and the load shall be less than or equal to, 1.33Ta , of the soil MSZ18-312 reinforcement. the minimum length of the top level of soil reinforcement shall be 16 feet.
| Section | Dimensions | Mass | Moment of inertia |
Modulus of section |
|||
| Width | Height | Thickness | Pile | Wall | |||
| w | h | t/s | |||||
| In | In | In | Lbs/ft | Lbs/ft2 | In4/ft | In3/ft | |
| MSZ10-312 | 38.82 | 2.19 | 0.312 | 49.72 | 15.37 | 1.3 | 0.67 |
| MSZ10-340 | 38.82 | 2.19 | 0.340 | 54.10 | 16.72 | 1.41 | 0.72 |
| MSZ10-350 | 38.82 | 2.19 | 0.350 | 55.69 | 17.22 | 1.45 | 0.74 |
| MSZ10-375 | 38.82 | 2.19 | 0.373 | 59.67 | 18.45 | 1.56 | 0.79 |
| MSZ10-406 | 38.82 | 2.19 | 0.406 | 64.60 | 19.97 | 1.73 | 0.86 |
| MSZ11-312 | 38.55 | 3.53 | 0.312 | 49.72 | 15.48 | 6.83 | 3.76 |
| MSZ11-340 | 38.55 | 3.53 | 0.340 | 54.1 | 16.84 | 7.43 | 4.06 |
| MSZ11-350 | 38.55 | 3.53 | 0.350 | 55.69 | 17.34 | 7.65 | 4.17 |
| MSZ11-375 | 38.55 | 3.53 | 0.375 | 59.67 | 18.58 | 8.21 | 4.44 |
| MSZ11-406 | 38.55 | 3.53 | 0.406 | 64.6 | 20.11 | 8.92 | 4.79 |
| MSZ12-312 | 37.72 | 6.64 | 0.312 | 49.72 | 8.76 | 29.29 | 8.76 |
| MSZ12-340 | 37.72 | 6.64 | 0.340 | 54.1 | 9.50 | 31.87 | 9.50 |
| MSZ12-350 | 37.72 | 6.64 | 0.350 | 55.69 | 9.77 | 32.84 | 9.77 |
| MSZ12-375 | 37.72 | 6.64 | 0.375 | 59.67 | 10.43 | 35.17 | 10.43 |
| MSZ12-406 | 37.72 | 6.64 | 0.406 | 64.6 | 11.27 | 38.16 | 11.27 |
| MSZ13-312 | 36.38 | 9.58 | 0.312 | 49.72 | 14.13 | 67.86 | 14.13 |
| MSZ13-340 | 36.38 | 9.58 | 0.340 | 54.10 | 15.32 | 73.79 | 15.32 |
| MSZ13-350 | 36.38 | 9.58 | 0.350 | 55.69 | 15.74 | 75.93 | 15.74 |
| MSZ13-375 | 36.38 | 9.58 | 0.375 | 50.67 | 16.81 | 81.34 | 16.81 |
| MSZ13-406 | 36.38 | 9.58 | 0.406 | 64.6 | 18.18 | 88.27 | 18.18 |
| MSZ14-312 | 34.56 | 12.24 | 0.312 | 12.27 | 19.62 | 120.97 | 19.62 |
| MSZ14-340 | 34.56 | 12.24 | 0.340 | 18.89 | 21.29 | 131.28 | 21.29 |
| MSZ14-350 | 34.56 | 12.24 | 0.350 | 19.34 | 21.91 | 135.50 | 21.91 |
| MSZ14-375 | 34.56 | 12.24 | 0.375 | 20.72 | 23.38 | 144.93 | 23.38 |
| MSZ14-406 | 34.56 | 12.24 | 0.406 | 22.43 | 25.29 | 157.25 | 25.29 |
| MSZ15-312 | 32.79 | 14.11 | 0.312 | 49.72 | 18.20 | 172.66 | 24.24 |
| MSZ15-340 | 32.79 | 14.11 | 0.340 | 54.10 | 19.80 | 187.52 | 26.27 |
| MSZ15-350 | 32.79 | 14.11 | 0.350 | 55.69 | 20.38 | 193.26 | 27.06 |
| MSZ15-375 | 32.79 | 14.11 | 0.375 | 59.67 | 21.84 | 207.03 | 28.91 |
| MSZ15-406 | 32.79 | 14.11 | 0.406 | 64.60 | 23.64 | 224.46 | 31.27 |
| MSZ16-312 | 31.05 | 15.54 | 0.312 | 49.72 | 19.22 | 223.36 | 28.45 |
| MSZ16-340 | 31.05 | 15.54 | 0.340 | 54.10 | 20.91 | 242.98 | 30.88 |
| MSZ16-350 | 31.05 | 15.54 | 0.350 | 55.69 | 21.53 | 249.85 | 31.74 |
| MSZ16-375 | 31.05 | 15.54 | 0.375 | 59.67 | 23.06 | 267.87 | 33.95 |
| MSZ16-406 | 31.05 | 15.54 | 0.406 | 64.60 | 24.97 | 290.74 | 36.75 |
| MSZ17-312 | 29.71 | 16.43 | 0.312 | 49.72 | 20.09 | 262.34 | 31.60 |
| MSZ17-340 | 29.71 | 16.43 | 0.340 | 54.1 | 21.86 | 285.10 | 34.27 |
| MSZ17-350 | 29.71 | 16.43 | 0.350 | 55.69 | 22.50 | 293.36 | 35.25 |
| MSZ17-575 | 29.71 | 16.43 | 0.375 | 59.67 | 24.11 | 314.57 | 37.71 |
| MSZ17-406 | 29.71 | 16.43 | 0.406 | 64.60 | 26.10 | 241.03 | 40.80 |
| MSZ18-312 | 28.38 | 17.2 | 0.312 | 49.73 | 20.58 | 296.05 | 34.49 |
| MSZ18-340 | 28.38 | 17.2 | 0.24 | 54.1 | 22.39 | 322.09 | 37.45 |
| MSZ18-350 | 28.38 | 17.2 | 0.350 | 55.69 | 23.04 | 330.95 | 38.46 |
| MSZ18-375 | 28.38 | 17.2 | 0.375 | 59.67 | 24.69 | 354.49 | 41.12 |
| MSZ18-406 | 28.38 | 17.2 | 0.406 | 64.6 | 26.74 | 384.83 | 44.53 |
| MSZ19-340 | 26.88 | 17.9 | 0.340 | 54.1 | 23.61 | 368.18 | 41.17 |
| MSZ19-350 | 26.88 | 17.9 | 0.350 | 55.69 | 24.30 | 867.04 | 42.24 |
| MSZ19-375 | 26.88 | 17.9 | 0.375 | 59.67 | 26.04 | 929.74 | 45.25 |
| MSZ19-406 | 26.88 | 17.9 | 0.406 | 64.60 | 28.19 | 1008.15 | 48.97 |
+86-18018031808 
+86-18018031808